Pro/E^ฎ WildfireTM Mechanism Kinematics (MDX) Training Course  

IN-Tuition - our new Pro/ENGINEER^ฎ Training Program - We Come to You

In-house, Intensive training for Individuals. We come to you to deliver these courses. You use your own software, we supply the trainer. It is cheaper than you think, because of our special rates for 1, 2 or 3 users. See below to download brochure with prices.

As well as this course there are other courses available in Pro/ENGINEER^ฎ  & Pro/MECHANICA^ฎ  For a list, go here.

This course is available for Wildfire 2.0 or Wildfire 3.0

.Mechanism Kinematics (MDX) Content (1 day)

This course introduces you to the Mechanisms Design functionality that is in the Mechanism Design Extension (MDX), which is part of the Pro/ENGINEER Foundation licence. You learn how to define assemblies using Mechanism joints, rather than the traditional ‘Mate & Align commands. This course covers kinematic analysis of mechanisms. For dynamic analysis, i.e. solutions involving forces, please see our Mechanism Dynamics (MDO) course. For optimisation of mechanisms, please see our Behavioural Modelling (BMX) course.

•         Introduction

•         The Mechanism Menu

•         Mechanism Design Overview

•         Defining Fixed Bodies

•         Joint Connections

•         Drag the Mechanism

•         Advanced Connections

•         Servo Motors

•         Analyse the Mechanism

•         Kinematic Analysis

•         Playbacks & Movies

•         Trace Curves & Motion Envelopes

•         Mechanism Measurements

Pre-requisite : Previous Pro/Engineer experience or training

Note: It may not be possible to get through everything in the time, in which case the most appropriate items will be selected.

Download the brochure Pro/Engineer Mechanism -Kinematics (MDX)

To book a course please go here

Stress Analysis Consultants  Mechanical Engineering Consultancy  Pro/Engineer Wildfire  Pro/Mechanica  Pro/Engineer Training  CETol Software  Graficalc Software  Design Automation   Design Optimisation  FMEA  New Product Development  PD-Trak NPD Software  CFD Analysis  Tolerance Analysis

Questions or comments about this web site should be addressed to .
Copyright ฉ 1998 - 2008 Elite Consulting Ltd. Registered in England & Wales No. 2823712 . Last modified: April 05, 2008

Pro/ENGINEER, MECHANICA, Wildfire, Windchill & Behavioural Modelling are trademarks or registered trademarks of Parametric Technology Corporation or its subsidiaries in the U.S. and in other countries. CETol is a trademark of Sigmetrix LLC. PD-Trak is a trademark of PD-Trak Solutions. GrafiCalc & ToleranceCalc are trademarks of Geomate Company. Stage-Gate is a registered trademark of Product Development Institutte Inc.

Some text and images on this web site have been supplied by kind permission of Sigmetrix, Geomate & PD-Trak.