Home
Up

 

     

 

 

 

 

 

 

 

Design FMEA ( DFMEA )

A Design FMEA ( DFMEA or Design Failure Mode and Effects Analysis ) is performed during the design stage of a product to determine how it might fail, how likely such a failure would be (Occurrence), how serious it would be (Severity) and whether such a failure would be detected during the development programme (Detection).

There are several levels of a Design FMEA (DFMEA).

A System FMEA

This is performed on a whole system or subsystem and can be started before the detail design of all the parts has been undertaken. In fact it should be started as early as possible.

A Design FMEA

This is done on smaller assemblies, down to part level if necessary. This is usually done a bit later in the design and development process, but it should not be left too late.

How to do a Design FMEA

The process is similar to a brainstorm and should involve a multi-disciplinary team of ideally 4-8 people. The results are recorded on a special form (often an Excel Spreadsheet).  The Severity, Occurrence and Detection are each scored from 1-10, and then these scores are combined into a Risk Priority Number (RPN), to give an overall ranking. Those with the highest RPN are identified for action to reduce the RPN. This can often result in a re-design, which is why doing an FMEA should not be left too late. Also Significant & Critical Characteristics are identified, which are those for which a Process FMEA should be performed.

An example is shown below.

Note: The detection score should quantify the likelihood that the Design Verification Plan (DVP) detects the problem during the engineering programme. Therefore an initial DVP should exist and be known prior to performing the FMEA.

Elite Consulting can assist you with doing Design FMEAs in your company, either by conducting FMEA Training, and/or FMEA Consultancy. We can also act as facilitators for your Design FMEA sessions.

Please contact us for more details.

.

Home Up Contact Links Cookies

 Project Management  FMEA  New Product Development  PD-Trak NPD Software  Elite-Consulting.co.uk

Questions or comments about this web site should be addressed to .
Copyright 1998 - 2014 Elite Consulting Ltd. Registered in England & Wales No. 2823712
Elite Consulting Ltd., Carr House, 53 High St., Harpole, Northampton, NN7 4BS, England, Tel No 01604 830886

PD-Trak is a trademark of PD-Trak Solutions. Stage-Gate is a registered trademark of Stage-Gate Inc. PRINCE2 is a Registered Trade Mark of the Office of Government Commerce in the United Kingdom and other countries

Some text and images on this web site have been supplied by kind permission of PD-Trak.